Monroe Rear Shock Absorber 34678

A Monroe 34678 Gas-Magnum rear shock for 2000 to 2005 Silverado 1500 4WD and AWD trucks, using LS47 mounts at both ends and an internal rebound bumper.

Part number: 34678
Position: Rear
Condition: New
Our SKU: 34678

Add your vehicle above to check this part against it.

$38.98

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
2000	Chevrolet	Silverado 1500	4WD
2004	Chevrolet	Silverado 1500	AWD
2005	Chevrolet	Silverado 1500	4WD

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

Monroe 34678 is the rear axle shock in the Gas-Magnum family. It is nitrogen charged, with a swage-hardened pressure tube and arc-welded mounts, and Monroe fits a multi-lip seal and sintered iron rod guide to reduce friction. Its full displaced valving aims for steady control as loads change in the bed. Both ends use the LS47 mount style. It includes an internal rebound bumper but no bump stop or hydraulic lockout, and no parts pack is listed. Monroe says the design meets original equipment requirements.

Fitment notes

Catalog rows cover the 2000 and 2005 Chevrolet Silverado 1500 with 4WD and the 2004 Silverado 1500 AWD. It is listed for trucks without electronic adjustable suspension. Check that your rear shocks use the LS47 mount at the top and bottom, and confirm your exact truck in the fitment table or by sending your VIN.

Specifications and features

Position: rear
Gas-Magnum, nitrogen gas charged
Upper and lower mount code: LS47
Internal rebound bumper: yes
No bump stop, no hydraulic lockout
No parts pack listed
Without electronic adjustable suspension

Installation notes

Replace rear shocks in pairs. Since no parts pack is listed, check your existing bolts and nuts before removal and have replacements ready if they are rusted. Support the frame on jack stands and keep the axle supported while the shocks are off.