DIY Solutions Reference Sensor ESS00108

DIY Solutions ESS00108 is an engine crankshaft position sensor listed for the 1999 Chevrolet Corvette with the 5.7L V8, eighth VIN digit G. It is also used in LS swaps.

Part number: ESS00108
Condition: New
Our SKU: ESS00108

Add your vehicle above to check this part against it.

$28.95

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
1999	Chevrolet	Corvette	5.7L V8 VIN: G

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

The crankshaft position sensor, often called a reference sensor, reads the rotation of the crank so the computer knows when to fire the coils and injectors. When it fails, the engine may crank without starting, stall when hot or set a crank sensor code. The ESS00108 from DIY Solutions replaces that sensor on the LS1 powered 1999 Corvette. The catalog also lists it as a common pick for LS swap projects, where builders need a sensor that matches the LS crank reluctor setup.

Fitment notes

This sensor is listed for the 1999 Chevrolet Corvette with the 5.7L V8, and the note calls for an eighth VIN digit of G. Check your VIN before ordering. For an LS swap, confirm the sensor style your engine and harness use. Look up your car in the fitment table, or send your VIN and we will confirm.

Specifications and features

Part type: crankshaft position sensor
Engine: 5.7L V8, VIN code G
Also used for LS swaps
Condition: new
Sold individually

Installation notes

Disconnect the battery before unplugging the sensor. On the LS1 it sits at the rear of the block, so access is tight. Lube the O-ring lightly with clean oil, seat the sensor fully, and clear any stored codes afterward.