Ships across the US Fitment checked against your vehicle Call (315) 288-0687
Cart
Add your vehicle to see parts that fit

Body Mechanical & Trim

Door Latch Assembly

A door latch assembly is the mechanism inside the door that grabs the striker on the body and holds the door closed. We carry 34 door latch assemblies from $18 to $319 for 1950-2023 vehicles, from Action Crash, AC Delco and others, with fits for the Chevrolet Impala, Malibu and Corvette, Honda Odyssey and Nissan Titan.

Shop door latch assembly by vehicle

Chevrolet Impala 10 Chevrolet Malibu 7

34 parts

Signs of a failing latch

Watch for a door that will not latch closed or springs back open, a door that will not open from inside or outside, a door ajar light that stays on, and power locks that stop working on one door. Many modern latches include the lock actuator, so a buzzing or clicking noise from inside the door with no lock movement can also point to the latch assembly. A door that does not latch securely is a safety problem, so repair it promptly.

Position and actuator type

Latches are listed by door: front left, front right, rear left, rear right, and on minivans the sliding door. Driver and passenger latches are mirror images and not interchangeable. Many listings are electric, with a power lock actuator built in, while others are manual. Some Action Crash latches are reconditioned original equipment. A wiring harness is not included with the listings that note it, so you reuse your door connector.

Fitting it safely

Choose your year, make and model and check the fitment table for door count, power locks and trim. Remove the door panel, roll the window up and photograph the rod and cable connections. Once the new latch is installed and connected, test it with the door open: push the latch closed with a screwdriver, then release it with the inside and outside handles and the lock switch. Only close the door after it releases correctly.

Door Latch Assembly questions

Is the door lock actuator part of the latch?

On many newer vehicles, yes. The actuator is built into the latch and replaced as one assembly. Older vehicles often have a separate actuator. The listing title and contents show which you have.

How do I test a new door latch before closing the door?

With the door open, push the latch jaw closed with a screwdriver to simulate latching. Then open it with each handle and the lock switch. If it releases every time, close the door.

Why does my door not stay closed?

Common causes are a worn or sticking latch, a misadjusted striker, or a latch frozen by dirt or ice. Try cleaning and lubricating the latch first. If it still does not catch, replace the assembly.

Not sure it fits?Tell us your year, make and model and we will check the part for you.