Gates Heater To Pipe-2 Heater Hose 28411

Gates 28411 is a straight, cut to length heater hose, 6 inches long, listed for the heater to pipe position 2 on the 1999 Chevrolet Camaro 3.8L V6.

Part number: 28411
Position: Heater To Pipe-2
Condition: New
Our SKU: 28411

Add your vehicle above to check this part against it.

$54.43

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
1999	Chevrolet	Camaro	3.8L V6 GAS

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

Heater hoses carry hot coolant from the engine to the heater core and back. As rubber ages it hardens, swells or cracks, and a burst hose can drain the coolant quickly. Gates 28411 is a standard straight heater hose supplied as a 6 inch length. You trim it to fit the heater to pipe connection. It replaces one specific section, not the entire heater hose run.

Fitment notes

Gates 28411 is listed for the 1999 Chevrolet Camaro with the 3.8L V6 gas engine, at the heater to pipe position 2. The V8 cars use different hoses. Measure your old hose and check the fitment table, or send your VIN for a check before you order.

Specifications and features

Position: heater to pipe 2
Type: straight heater hose, standard
Length: 6 inches, cut to length
Engine listed: 3.8L V6 gas
Condition: new

Installation notes

Work only on a cold engine. Drain some coolant first and use new clamps. Inspect the other heater hoses at the same time. Refill with the correct coolant and bleed air from the system, then check for leaks after a warm up.