VDO TPMS Sensor SE10001HP for Ford Explorer

VDO SE10001HP is a pre-programmed REDI-Sensor tire pressure sensor listed for the 2015 Ford Explorer built up to March 23, 2015. It arrives with a metal clamp-in valve, cap and mounting hardware.

Part number: SE10001HP
Condition: New
Our SKU: SE10001HP-18507

Add your vehicle above to check this part against it.

$31.99

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
2015	Ford	Explorer	All

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

This VDO REDI-Sensor reads the air pressure inside one tire and sends it to the vehicle's tire pressure monitoring system. It runs on the 315 MHz band and is a multi-application design, so one sensor covers several vehicles instead of a single model. It comes pre-programmed, which means it does not need to be cloned or coded before it goes in the wheel. The metal clamp-in valve stem, valve cap and mounting hardware are all in the box, so you have the parts needed to mount it on the rim.

Fitment notes

The catalog lists part SE10001HP for the 2015 Ford Explorer, with a production cutoff of March 23, 2015. Explorers built after that date may use a different sensor, so check the build date on the driver door jamb label before you order. The table shows one row for this part and may not be complete, so confirm your vehicle in the table or send us your VIN.

Specifications and features

Type: pre-programmed REDI-Sensor TPMS sensor
Frequency: 315 MHz
Valve: metal clamp-in
Valve, cap and mounting hardware included
Multi-application sensor design
Listed for vehicles built up to 03/23/2015

Installation notes

A tire shop needs to break the bead to reach the sensor. Torque the clamp-in nut to the value in the instructions, not by feel. After mounting, run the Explorer's TPMS relearn procedure so the system learns the new sensor ID.