AC Delco ABS Wheel Speed Sensor Wire Harness

AC Delco Rear ABS Wheel Speed Sensor Wire Harness 22717885

AC Delco 22717885 is a rear ABS wheel speed sensor wiring harness listed for the 2008 Chevrolet Malibu Classic LS and LT with front and rear disc brakes and ABS option J67.

Part number: 22717885
Position: Rear
Condition: New
Our SKU: 22717885

Add your vehicle above to check this part against it.

$69.43

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
2008	Chevrolet	Malibu	Classic LS, Front: Disc Rear: Disc 4-Wheel ABS
2008	Chevrolet	Malibu	Classic LT, Front: Disc Rear: Disc 4-Wheel ABS

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

This harness carries the signal from a rear wheel speed sensor to the ABS control module. A chafed or corroded harness can cause an ABS or traction warning light even when the sensor itself is fine. Part 22717885 is a new AC Delco piece for the rear position. The catalog ties it to cars with four wheel disc brakes and four wheel ABS, coded J67 on the factory option list, so it replaces the original pigtail on those models.

Fitment notes

The catalog lists 22717885 for the 2008 Chevrolet Malibu Classic in LS and LT trim with front disc, rear disc brakes and four wheel ABS. It is not meant for cars without ABS option J67 or with rear drums. Check the RPO sticker in the glovebox or trunk, then confirm your version in the fitment table or send your VIN.

Specifications and features

Position: rear
Type: ABS wheel speed sensor wiring harness
Requires front and rear disc brakes with ABS (J67)
Trims listed: Malibu Classic LS and LT
Condition: new

Installation notes

Raise the rear of the car and support it on jack stands. Route the new harness along the original clips so it stays clear of the axle and exhaust. Inspect the sensor tip and tone ring while you are there, then clear the ABS codes and road test.