Action Crash Left – Driver Side Mirror GM1320354

Action Crash GM1320354 is a driver side power tow mirror listed for 2007-2014 Chevrolet Silverado 2500 HD trucks, telescopic with heated glass and a turn signal.

Part number: GM1320354
Position: Left - Driver Side
Condition: New
Our SKU: GM1320354

Add your vehicle above to check this part against it.

$171.12

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
2007–2009	Chevrolet	Silverado 2500 HD	DRIVER SIDE POWER DOOR MIRROR; TRAILER TOW TYPE; TELESCOPIC; WITH HEATED GLASS; WITH TURN SIGNAL; MANUAL FOLDING; BLACK TEXTURED
2011	Chevrolet	Silverado 2500 HD	DRIVER SIDE POWER DOOR MIRROR; TRAILER TOW TYPE; TELESCOPIC; WITH HEATED GLASS; WITH TURN SIGNAL; MANUAL FOLDING; BLACK TEXTURED
2014	Chevrolet	Silverado 2500 HD	DRIVER SIDE POWER DOOR MIRROR; TRAILER TOW TYPE; TELESCOPIC; WITH HEATED GLASS; WITH TURN SIGNAL; MANUAL FOLDING; BLACK TEXTURED

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

Towing a wide trailer needs a mirror that reaches further out. GM1320354 is the left side trailer tow mirror with telescopic extension and manual folding. The glass adjusts by power and is heated to clear frost and fog. A turn signal is built in. The housing is black textured. It is a premium grade new part from Action Crash.

Fitment notes

GM1320354 is listed for the 2007-2009, 2011 and 2014 Chevrolet Silverado 2500 HD on the driver side. It is meant for trucks wired for power, heated, signal tow mirrors. Compare your connector, check the fitment table, or send your VIN.

Specifications and features

Position: left, driver side
Trailer tow type, telescopic
Heated glass with turn signal
Power adjust, manual folding
Finish: black textured

Installation notes

Disconnect the battery first. Pull the door trim to reach the mirror nuts and plug. Have a helper support the mirror during removal, then check every function works before you refit the trim.