MTC Air Mass Meter Boot W0133-1744120

MTC W0133-1744120 is a new air mass meter boot listed for California specification 1996 Toyota Camry 2.2L cars built in North America up to June 30, 1996.

Part number: W0133-1744120
Condition: New
Our SKU: W0133-1744120

Add your vehicle above to check this part against it.

$31.58

In stock

Shipping options and cost shown at checkout
Returns accepted on unused parts, see our returns policy
Unsure about fit? Send your VIN before you order

Vehicle fitment

Year	Make	Model	Trim, body and engine
1996	Toyota	Camry	2.2L 4 Cyl

Rows are what the manufacturer lists for this part. If your trim or engine is missing, contact us with your VIN before ordering.

About this part

This is the rubber intake connector that carries metered air from the air flow meter to the throttle body. The California emissions version of the 2.2L Camry uses its own boot, and this MTC part is the one cataloged for it. Cracks in the duct let in air the meter never measured, which can trigger lean codes and an unsteady idle. A new boot seals the intake again.

Fitment notes

Part W0133-1744120 is listed for the 1996 Toyota Camry with the 2.2L 4 cylinder. The note limits it to North American made cars built up to 06/30/1996 and to California specification models. Federal emissions cars use a different boot. Check the emissions label under the hood and the table above, or send your VIN.

Specifications and features

Engine: 2.2L 4 cylinder
California specification models
North American built
Production through 06/30/1996
Brand: MTC

Installation notes

Disconnect any attached vacuum or breather lines, then loosen both clamps. Look over the clamps themselves and replace any that are rusted. After fitting, start the engine and listen for hissing around the boot to confirm it seals.