Ships across the US Fitment checked against your vehicle Call (315) 288-0687
Cart
Add your vehicle to see parts that fit

Make

Land Rover parts

Land Rover parts on this page cover 49 listings for vehicles from 1994 to 2020. The Discovery and Range Rover have the most parts, followed by the Range Rover Sport and LR3. Brands include Genuine, Beck Arnley, Eurospare, SKP, ZF and Dorman, and each listing shows the exact years and engines it fits.

Models

Land Rover models covered

The Discovery and Range Rover have 14 parts each. The Range Rover Sport has 9 and the LR3 has 8. The Range Rover Evoque has 2, and the Discovery Sport and LR2 have 1 each. That is 7 Land Rover models in total. The Range Rover name covers several generations, so your model year decides which parts apply.

Land Rover part types listed

Air compressors are the most listed part type with 4 listings. They supply the air suspension used on several Land Rover models. Exhaust manifold gaskets and brake pad sensors have 3 each, and wiper blades, head bolts, turn signals, neutral safety switches, thermostats and driveshaft supports have 2 each. There is also a distributor for older engines.

Fitment and air suspension tips

Not every Land Rover has air suspension, so confirm yours does before buying a compressor. Engines vary within a model, which changes gaskets, thermostats and head bolts. Head bolts are usually stretch bolts meant for one use, so replace them as a set when the head comes off. Check the fitment table for engine and year, and use your VIN to confirm.

Land Rover questions

Do you sell air suspension compressors for Land Rover?

Yes, there are 4 Land Rover air compressor listings. Select your model and year, and confirm your vehicle has air suspension before ordering.

Is the LR3 the same as the Discovery?

The LR3 is the North American name for the third generation Discovery. It is listed separately here, so select LR3 if that is the name on your vehicle.

Should I reuse head bolts on a Land Rover engine?

Head bolts on many engines are torque-to-yield and meant for one use. Fit new bolts whenever the cylinder head is removed, and follow the specified torque sequence.

Not sure it fits?Tell us your year, make and model and we will check the part for you.