Parts for your Chevrolet Camaro
1991 Chevrolet Camaro Starters
Buy Chevrolet Camaro starters online, whether you have a classic small block or a late-model V6. We list 19 starters for 1969-2015 Camaro models, priced from $24.18 to $196.58. Fitment includes the 3.4L, 3.6L and 3.8L V6 and the 5.0L, 5.7L and 6.2L V8, with units from AC Delco, Powermaster, Pure Energy, Bosch, TYC and TRQ.
Year
More Chevrolet Camaro parts
Camaro starter fitment by engine
Engine and transmission decide the starter. The Camaro years covered here run from 1969 to 2002 and from 2010 to 2015, and they used inline sixes, V6 engines, small and big block V8s, the LT1 and the LS family. Starters for these differ in mounting, gear teeth, power and electrical connections.
Listings here note details such as automatic transmission with the 5.0L or 5.7L, or the SS 6.2L L99, so match those. On 1969-1981 cars, engine swaps are common, so check the starter against the engine actually in the car and its flywheel or flexplate. Compare the bolt pattern, nose design, tooth count and solenoid terminals with your old starter.
Signs of a failing Camaro starter
A single click with no crank often points to a bad solenoid. Slow or on-and-off cranking, a starter that spins without turning the engine and grinding while cranking are other common signs. Grinding can also mean damaged flywheel or flexplate teeth.
Some starters work cold but fail when hot, which is called heat soak. Headers and nearby exhaust make it worse. Before you buy, rule out the cheaper causes. A weak battery, corroded cables, bad grounds and a faulty clutch or park and neutral safety switch can all stop the engine from cranking.
Installing a Camaro starter
Disconnect the negative battery cable first. The solenoid's battery terminal is unfused and can short against metal. Support the starter while you remove the mounting bolts, as exhaust, shields or the crossmember can make access tight on some engines.
With the starter out, inspect the ring gear on the flywheel or flexplate. A new starter will not last against damaged teeth. Clean and tighten the battery positive and ground connections, then check voltage drop while cranking. Use shims only when the starter maker or the service procedure calls for them, because wrong shimming causes grinding and early wear.
More about starters
Read our starters buying guide for how the part works and what to look for in any vehicle.
Camaro questions
Why does my Camaro starter only fail when the engine is hot?
That pattern is often called heat soak, and it is common near headers or exhaust parts. Check the starter and the cable voltage drop when hot, since weak cables can cause the same symptom.
Does the starter differ between automatic and manual Camaros?
It can. Transmission and flywheel or flexplate type are part of starter fitment, and some listings here are for automatic cars only. Check the fitment table for your engine and transmission.
Can a bad battery cable make my Camaro starter just click?
Yes. Low voltage from a weak battery, corroded cables or poor grounds can cause clicking or slow cranking. Test the battery and connections before replacing the starter.