Parts for your Chevrolet S10
2001 Chevrolet S10 Accessory Belt Idler Pulleys
Buy Chevrolet S10 accessory belt idler pulleys online for 1989-2004 trucks. There are 17 idler pulleys, tensioner pulleys and serpentine belt drive kits here from $5.73 to $99.98, by Gates, AC Delco, Dayco, Dorman, SKP and API. Listings are marked smooth, grooved or main drive, so match the pulley surface and your engine, whether it is the 2.2L four or the 4.3L V6.
Year
More Chevrolet S10 parts
Engine and pulley design
S10 idler pulley fitment is driven by the engine, belt routing, pulley size and tensioner design, not by cab, bed, trim or 2WD and 4WD. Fitment samples here include the 2.2L four-cylinder, including flex fuel, and the 4.3L V6. The 1989-1993 and 1994-2004 trucks have their own layouts, and 2004 coverage should be checked carefully because many catalogs stop at 2003.
Pulleys come smooth or grooved, and diameters vary by application. Match the belt contact surface and rib count, outside diameter, width, bore and offset to your old pulley. A fixed idler pulley and a tensioner pulley are different parts.
Signs of a failing idler
An idler pulley spins on a sealed bearing. When the bearing wears, you may hear chirping, squealing, grinding, humming or rumbling from the front of the engine. The pulley may wobble, feel rough when spun by hand, or pull the belt out of line.
If it seizes or breaks, it can shred or throw the serpentine belt and take out belt-driven parts such as the alternator, power steering pump or water pump. The tensioner, alternator, pumps and the belt itself can also make noise, so confirm which pulley it is before you buy.
Pulley alone or a full kit
If only the idler is bad, a single pulley is enough. If the belt and tensioner are worn too, a serpentine belt drive component kit from Gates, Dayco or AC Delco covers more of the system at once.
Release the belt tension, remove the belt, unbolt the old pulley and fit the new one. Route the belt by the diagram for your engine, then check alignment and tension. While the belt is off, spin every pulley by hand and replace any that are rough, loose or noisy. Replace the belt too if it is cracked or glazed.
More about accessory belt idler pulleys
Read our accessory belt idler pulleys buying guide for how the part works and what to look for in any vehicle.
S10 questions
Do the 2.2L and 4.3L S10 use the same idler pulley?
Not necessarily. Belt routing and pulley design depend on the engine. Pick your engine in the fitment table and match the pulley surface and diameter to your old part.
How do I know if my S10 idler pulley is bad?
With the belt off, spin the pulley by hand. Roughness, grinding, wobble or play points to a worn bearing. A chirp or squeal from the front of the engine is another sign.
Do I need a smooth or grooved idler pulley for my S10?
Match what is on your engine now. A smooth pulley runs on the back of the belt and a grooved one on the ribbed side. Listings here are marked smooth or grooved.